LW-HV130

WoodsCelo HV130 Carboxymethyl Cellulose Very High Viscosity

Food grade carboxymethyl cellulose with Brookfield viscosity 3000 mPa.s at 1% aqueous solution and a minimum degree of substitution of 0.90.

WoodsCelo HV130 Carboxymethyl Cellulose Very High Viscosity is a food grade carboxymethyl cellulose supplied as a white or light yellow powder, granule or fibre solid. It is odourless, tasteless and non-toxic, and it dissolves in water to form a clear, viscous solution.

As a thickener, stabiliser and suspending agent it is used in beverages and syrups, dairy products, bakery, confectionery, ready-to-eat foods and animal feed. The viscosity grade determines how much body a finished product takes, and the degree of substitution determines water solubility and acid stability.

Every batch is supplied with a certificate of analysis covering purity, chloride, sodium glycolate, loss on drying, heavy metals and the microbiological limits set out in the specification.

Technical FAQ

What viscosity does WoodsCelo HV130 provide?
WoodsCelo HV130 is a very high viscosity food grade carboxymethyl cellulose with a Brookfield viscosity of 3000 mPa.s measured on a 1% aqueous solution. The viscosity range is the primary difference between this grade and the other six in the range.
What is the degree of substitution of WoodsCelo HV130?
WoodsCelo HV130 has a minimum degree of substitution of 0.90. Degree of substitution measures how many of the hydroxyl groups along the cellulose backbone have been replaced with a carboxymethyl group. A higher value gives better water solubility and better acid stability, which is why the two HDS grades are supplied separately from their viscosity equivalents.
What purity and microbiological limits does WoodsCelo HV130 meet?
WoodsCelo HV130 is supplied with purity 99.50% minimum, chloride 0.50% maximum, sodium glycolate 0.40% maximum, loss on drying 8.00% maximum, arsenic 2.00 mg/kg maximum and lead 2.00 mg/kg maximum. The microbiological limits are total plate count 500 cfu/g maximum, moulds and yeasts 100 cfu/g maximum, and E. coli, Salmonella and Staphylococcus aureus not detected. Every batch ships with a certificate of analysis covering these values.
What is WoodsCelo HV130 used for?
WoodsCelo HV130 is used as a thickener, stabiliser and suspending agent in beverages and syrups, dairy products, bakery, confectionery, ready-to-eat foods and animal feed. With a very high viscosity profile it is suited to systems that need body without a heavy suspension, while the higher degree of substitution grades are chosen where acid stability or clear dissolution matters. Because the product is food grade and supplied with a certificate of analysis for every batch, it can be evaluated against the target formulation without a separate pre-trial purchase.